Item Description

The illustration of Rear Axle

 

Suspension Product

AR115

 

 

Rated load(kg)

115000

Brake Type

Disc/Drum

Rim Length(mm)

1832

Max out Torque(Nm)

30000

Distribution Circle

10*335

Flange Sort

Plain Flange

Ratio

three.15~6.17

Applicable Bus

7m Bus

Wheel Hub Type

Bearing Unit

Bodyweight(oil included)(kg)

690()Drum)/630(Disc)

The In depth Drawing of Outlined Rear Axle

Sort: Entrance AXLEAF 2.2~2.7                                                                                                   Kind: Front AXLE–AF 5.five

Software: 5~7 m Coach/Town Bus                                                                                               Software: ten~11 m Coach/City Bus

                                                                  

Type: Entrance AXLE–AF 75                                                                                            Sort: REAR AXLE–AR 40

Software: Above eleven m Mentor/Metropolis Bus                                                                       Software: 5~8m Coach/Town Bus
Economic climate of The Axle and Suspension

In buy to enhance the axle and suspension top quality, boost buyer auto knowledge, lessen following-sales routine maintenance expenses, completely understand from domestic and foreign superior axle engineering, especially in the axle wheel edge special innovation, from grease lubricated wheel edge, to oil lubricated wheel edge, and then to the maintainance cost-free axle ans suspension wheel edge, when compared with the previous era, there is a qualitative leap. Amid them, there are 2 kinds of routine maintenance-free of charge wheel edge: oil lubrication upkeep-free of charge (normally five hundred,000 km servicing-totally free) and built-in servicing-totally free (specifically bearing device, 5 many years / 800,000 km upkeep-free).

Business Profile

 DUOYUAN Automobile Gear CO.LTD

Duoyuan automobile tools, addresses an location of a lot more than a hundred acres and has in excess of 300 staff, including much more than ninety experts and technical staff, more than ten senior engineers, and far more than thirty intermediate engineers.

Our aim is to become the third celebration expert car areas supplier with innovative spirit and foremost engineering. With ongoing design and improvement for 16 a long time, we have cooperate with YuTong Group for a phrase technique. Present product industry quantity: Over four hundred,000 pieces of bus particular axles, more than 250,000 kits of bus air suspensions once-a-year generation capacity: a hundred,000 parts of bus unique axle and 50,000 kits of bus air suspensions. In 2018, our revenue exceeded RMB 1.5 billion.

At existing, our products are mostly bus-oriented, delivering matching items to total ranges of versions these kinds of as passenger bus, tourist bus, team bus, community transportation bus, college buses and new strength bus Also, we are actively expanding truck and other industrial motor vehicle markets. Our goods are marketed to much more than one hundred thirty nations and regions in the globe this sort of as Cuba, Venezuela, Russia, Iran and Saudi Arabia as elements of total automobile.

In get to realize a better foreseeable future, we, by upholding the spirit of exploration, discover commonly from others’ powerful factors and soak up overseas and domestic innovative expertise, and attempt for the growth of China’s automotive products.

FAQ

Q:Are you buying and selling company or maker?

A: We are manufacturing facility who have been specializing in developing and production axle and suspension for twenty years .
Q:Can your products be personalized or modified?

A: We can style and produce the axl and suspension according to customers’ demands and motor vehicle parameters .
Q: What is your conditions of payment ?
A: one hundred% Advance payment by T/T right after signing the contract.
Q: What is your conditions of packing?
A: Usually, we set buggy axle on Picket pallets,Stretch film mounted in wood box . Or Customer required.
Q: How long is your delivery time?
A: Typically it is 15-25 times if the merchandise are in inventory. or it is 35-forty five times if the goods are not in stock, it is according to
amount.
Q: What is your axl sample plan?
A: We can source the buggy axle sample if we have ready elements in stock, but the buyers have to shell out the sample price and he courier expense.Please speak to with me with buggy axle.
Q. Do you test all your buggy axle prior to supply?
A: Yes, we have a hundred% check just before supply
Q: How do you make our enterprise lengthy-time period and great partnership?
A:1. We preserve axle and suspension a good quality and competitive price tag to ensure our consumers benefit
2. We respect each customer as our buddy and we sincerely do organization and make friends with them, no issue exactly where they arrive from.

After-sales Service: 1 Year
Condition: New
Axle Number: 1
Application: Bus
Certification: ISO
Material: Steel

###

Customization:

###

Suspension Model
AR115
 
 
Rated load(kg)
115000
Brake Type
Disc/Drum
Rim Distance(mm)
1832
Max out Torque(Nm)
30000
Distribution Circle
10*335
Flange Type
Plain Flange
Ratio
3.15~6.17
Applicable Bus
7m Bus
Wheel Hub Type
Bearing Unit
Weight(oil included)(kg)
690()Drum)/630(Disc)
After-sales Service: 1 Year
Condition: New
Axle Number: 1
Application: Bus
Certification: ISO
Material: Steel

###

Customization:

###

Suspension Model
AR115
 
 
Rated load(kg)
115000
Brake Type
Disc/Drum
Rim Distance(mm)
1832
Max out Torque(Nm)
30000
Distribution Circle
10*335
Flange Type
Plain Flange
Ratio
3.15~6.17
Applicable Bus
7m Bus
Wheel Hub Type
Bearing Unit
Weight(oil included)(kg)
690()Drum)/630(Disc)

Why Checking the Drive Shaft is Important

If you hear clicking noises while driving, your driveshaft may need repair. An experienced mechanic can tell if the noise is coming from one side or both sides. This problem is usually related to the torque converter. Read on to learn why it’s so important to have your driveshaft inspected by an auto mechanic. Here are some symptoms to look for. Clicking noises can be caused by many different things. You should first check if the noise is coming from the front or the rear of the vehicle.
air-compressor

hollow drive shaft

Hollow driveshafts have many benefits. They are light and reduce the overall weight of the vehicle. The largest manufacturer of these components in the world is CZPT. They also offer lightweight solutions for various applications, such as high-performance axles. CZPT driveshafts are manufactured using state-of-the-art technology. They offer excellent quality at competitive prices.
The inner diameter of the hollow shaft reduces the magnitude of the internal forces, thereby reducing the amount of torque transmitted. Unlike solid shafts, hollow shafts are getting stronger. The material inside the hollow shaft is slightly lighter, which further reduces its weight and overall torque. However, this also increases its drag at high speeds. This means that in many applications hollow driveshafts are not as efficient as solid driveshafts.
A conventional hollow drive shaft consists of a first rod 14 and a second rod 14 on both sides. The first rod is connected with the second rod, and the second rod extends in the rotation direction. The two rods are then friction welded to the central area of ​​the hollow shaft. The frictional heat generated during the relative rotation helps to connect the two parts. Hollow drive shafts can be used in internal combustion engines and environmentally-friendly vehicles.
The main advantage of a hollow driveshaft is weight reduction. The splines of the hollow drive shaft can be designed to be smaller than the outside diameter of the hollow shaft, which can significantly reduce weight. Hollow shafts are also less likely to jam compared to solid shafts. Hollow driveshafts are expected to eventually occupy the world market for automotive driveshafts. Its advantages include fuel efficiency and greater flexibility compared to solid prop shafts.

Cardan shaft

Cardan shafts are a popular choice in industrial machinery. They are used to transmit power from one machine to another and are available in a variety of sizes and shapes. They are available in a variety of materials, including steel, copper, and aluminum. If you plan to install one of these shafts, it is important to know the different types of Cardan shafts available. To find the best option, browse the catalog.
Telescopic or “Cardan” prop shafts, also known as U-joints, are ideal for efficient torque transfer between the drive and output system. They are efficient, lightweight, and energy-efficient. They employ advanced methods, including finite element modeling (FEM), to ensure maximum performance, weight, and efficiency. Additionally, the Cardan shaft has an adjustable length for easy repositioning.
Another popular choice for driveshafts is the Cardan shaft, also known as a driveshaft. The purpose of the driveshaft is to transfer torque from the engine to the wheels. They are typically used in high-performance car engines. Some types are made of brass, iron, or steel and have unique surface designs. Cardan shafts are available in inclined and parallel configurations.
Single Cardan shafts are a common replacement for standard Cardan shafts, but if you are looking for dual Cardan shafts for your vehicle, you will want to choose the 1310 series. This type is great for lifted jeeps and requires a CV-compatible transfer case. Some even require axle spacers. The dual Cardan shafts are also designed for lifts, which means it’s a good choice for raising and lowering jeeps.
air-compressor

universal joint

Cardan joints are a good choice for drive shafts when operating at a constant speed. Their design allows a constant angular velocity ratio between the input and output shafts. Depending on the application, the recommended speed limit may vary depending on the operating angle, transmission power, and application. These recommendations must be based on pressure. The maximum permissible speed of the drive shaft is determined by determining the angular acceleration.
Because gimbal joints don’t require grease, they can last a long time but eventually fail. If they are poorly lubricated or dry, they can cause metal-to-metal contact. The same is true for U-joints that do not have oil filling capability. While they have a long lifespan, it can be difficult to spot warning signs that could indicate impending joint failure. To avoid this, check the drive shaft regularly.
U-joints should not exceed seventy percent of their lateral critical velocity. However, if this speed is exceeded, the part will experience unacceptable vibration, reducing its useful life. To determine the best U-joint for your application, please contact your universal joint supplier. Typically, lower speeds do not require balancing. In these cases, you should consider using a larger pitch diameter to reduce axial force.
To minimize the angular velocity and torque of the output shaft, the two joints must be in phase. Therefore, the output shaft angular displacement does not completely follow the input shaft. Instead, it will lead or lag. Figure 3 illustrates the angular velocity variation and peak displacement lead of the gimbal. The ratios are shown below. The correct torque for this application is 1360 in-Ibs.

Refurbished drive shaft

Refurbished driveshafts are a good choice for a number of reasons. They are cheaper than brand new alternatives and generally just as reliable. Driveshafts are essential to the function of any car, truck, or bus. These parts are made of hollow metal tubes. While this helps reduce weight and expense, it is vulnerable to external influences. If this happens, it may crack or bend. If the shaft suffers this type of damage, it can cause serious damage to the transmission.
A car’s driveshaft is a critical component that transmits torque from the engine to the wheels. A1 Drive Shaft is a global supplier of automotive driveshafts and related components. Their factory has the capability to refurbish and repair almost any make or model of driveshafts. Refurbished driveshafts are available for every make and model of vehicle. They can be found on the market for a variety of vehicles, including passenger cars, trucks, vans, and SUVs.
Unusual noises indicate that your driveshaft needs to be replaced. Worn U-joints and bushings can cause excessive vibration. These components cause wear on other parts of the drivetrain. If you notice any of these symptoms, please take your vehicle to the AAMCO Bay Area Center for a thorough inspection. If you suspect damage to the driveshaft, don’t wait another minute – it can be very dangerous.
air-compressor

The cost of replacing the drive shaft

The cost of replacing a driveshaft varies, but on average, this repair costs between $200 and $1,500. While this price may vary by vehicle, the cost of parts and labor is generally equal. If you do the repair yourself, you should know how much the parts and labor will cost before you start work. Some parts can be more expensive than others, so it’s a good idea to compare the cost of several locations before deciding where to go.
If you notice any of these symptoms, you should seek a repair shop immediately. If you are still not sure if the driveshaft is damaged, do not drive the car any distance until it is repaired. Symptoms to look for include lack of power, difficulty moving the car, squeaking, clanking, or vibrating when the vehicle is moving.
Parts used in drive shafts include center support bearings, slip joints, and U-joints. The price of the driveshaft varies by vehicle and may vary by model of the same year. Also, different types of driveshafts require different repair methods and are much more expensive. Overall, though, a driveshaft replacement costs between $300 and $1,300. The process may take about an hour, depending on the vehicle model.
Several factors can lead to the need to replace the drive shaft, including bearing corrosion, damaged seals, or other components. In some cases, the U-joint indicates that the drive shaft needs to be replaced. Even if the bearings and u-joints are in good condition, they will eventually break and require the replacement of the drive shaft. However, these parts are not cheap, and if a damaged driveshaft is a symptom of a bigger problem, you should take the time to replace the shaft.

China Low Floor Bus Driven Axle Bus Coach Front Axles Bus Parts Rear Axle Half Shaft for Electric Motor Drive Axle     front drive shaft	 China Low Floor Bus Driven Axle Bus Coach Front Axles Bus Parts Rear Axle Half Shaft for Electric Motor Drive Axle     front drive shaft
editor by czh 2022-11-26