AL159973/AL77576/AL159964 Top Link End
Replacement Fits John Deere Link End Hook (End Only) That Fits Tractor Models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, and 2010 Dozerthe Thread Size Is 1.250″-7 Rh Unc. The Claw Is A Fits CAT 2, Ment For A 1″ Pin. Replaces Part Numbers: Ar46298, R26813
All OEM part numbers and logos are to be used for identification purposes only
The AL159973/AL77576/AL159964 Top Link End is suitable for the following models:
- John Deere: 6010, 6020, 6090MC, 6090RC, 6100, 6100MC, 6100RC, 6105M, 6110, 6110L, 6110MC, 6110RC, 6115M, 6120, 6120L, 6125M, 6130, 6200, 6200L, 6210, 6210L, 6215, 6220, 6220L, 6225, 6230, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6325, 6330, 6400, 6400L, 6410, 6410L, 6410S, 6415, 6420
▍Parameters of Top link End
▍Introduction of Top link End
The vibration of the Top Link End is very sensitive to the damage of the Link End, such as spalling, indentation, corrosion, crack, wear, etc., which will be reflected in the vibration measurement of the Top Link End. Therefore, the vibration can be measured by using a special Top Link End vibration meter (frequency analyzer, etc.), and the specific abnormal conditions can not be inferred from the frequency analysis. The measured values are different due to the service conditions of the Top Link End of the installation position of the sensor. Therefore, it is necessary to analyze and compare the measured values of each machine before determining the judgment standard.
The temperature of the Top Link End can generally be inferred from the temperature outside the Top Link End chamber. It is more appropriate if the outer ring temperature of the Top Link End can be directly measured by using the oil hole. Generally, the temperature of the Top Link End starts to rise slowly with the operation of the Top Link End and reaches a stable state after 1-2 hours. The normal temperature of the Top Link End varies with the thermal capacity, heat dissipation, rotating speed, and load of the machine. If the lubrication and installation parts are appropriate, the joint bearing temperature at the rod end will rise sharply, resulting in abnormally high temperatures. At this time, the operation must be stopped and necessary preventive measures must be taken. The thermal sensor can monitor the working temperature of the Top Link End at any time, and automatically alarm or stop when the temperature exceeds the specified value to prevent shaft burning
▍Parts by equipment type
We can supply the following repair replacement parts for John Deere agricultural machinery equipment and accept customization
Our products are widely applicable for that tractors and engines such as Massey Ferguson, John Deere, UTB, Fiat, Ford, New Holland, Perkins, Deutz, and so on. Our products have covered more than 6000 kinds of parts.
▍We Also Supply PTO Shafts & Agricultural Gearboxes
If you also need the PTO shafts, click here：https://hzpt.com/agricultural-pto-shaft/
We Also Supply Agricultural Gearboxes
You may need gearboxes, hydraulic cylinders, or a trailer hitch to get all your machines running and ready when you start working your fields. We at HZPT will ensure your agricultural needs are met, providing you with equipment and parts that are suitable for your agricultural application. We’re proud to offer over 6,000 parts in stock, so you can be sure we’ll have damaged parts in need of replacement. Whether you need hitch pins, blades, tines, PTO shafts, bale spears, disc bearings, roller chains, Caroni lawn mower parts, or sprayers. Even treat yourself to a brand new tractor seat for a more comfortable and comfortable work day.
HZPT TRANSMISSION GROP, referred to as HZPT for short, Hzpt is a subsidiary of ever power， is a Chinese auto and agricultural machinery parts manufacturer, we do not produce agricultural machinery, we produce replacement parts for agricultural machinery. We have been established for more than 20 years and have a wealth of experience and expertise. With continuous development, the hzpt group has become a globally recognized leader in the automotive and agricultural machinery parts industry. Currently, our products are exported all over the world, including Asia Pacific, South America, and Europe.