We – EPG Group the greatest agricultural gearbox and pto manufacturing facility in China with 5 different branches. For a lot more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
pto shaft series 4 Our john deere pto shield goods chains on pto shaft are r32 gtr driveshaft promoting hefty duty flexible travel shaft properly huge moe’s generate shaft in bush hog sq720 shear bolt Chinese bondioli and pavesi pto shaft marketplaces how to decide pto shaft duration and bmw x5 generate shaft some items bought in global markets are effectively obtained by Chinese and overseas consumers at home and abroad. EPG Equipment is positioned in XiHu Area HangZhou Zhejiang ,China. It is 30km from our manufacturing unit to HangZhou worldwide airport. This heavy-responsibility BW-1000XL brush chipper with its all-stell engine enclosure is developed to keep up for the long haul. In a position to Chip by means of substance up to 12” (30.5cm), the require to rim materials is lowered , generating the BW-1000XL an ideal machine for line-clearing contractors, rental yards and municipalities.
Improved with the modern day operator in brain, the BW-1000XL is available with a Tier 3 Cummins QSF 2.8L 74HP (55kW), when transpoting the device, anticipate smooth towing many thanks to the rubber -torsion suspension.
It is simple to see w EPT the BW-1000XL is the brush chipper that operators change to.
1: Operator security. Emergency cease buttom is created on facet.
2: A clutchless PTO system makes it possible for the cutter to be engaged without having employing a traditional slip clutch or loafer pulley and with no s EPT the motor. The program is easy to preserve – as soon as below the shield, belt alterations are effortlessly
completed without the use of resources.
3: The Feed system aids increase operator efficiency even though decreasing pressure on important motor areas. The feed-sensing control technique monitors motor rpm and automatically stops and reverses the feed roller when feeding larger, hardwood substance.
four: A huge rectangular 12″ x 17″ (thirty.5 cm x forty three.2 cm) feed opening helps increase productivity by minimizing the need to have to trim materials just before feeding it into the chipper.
five: The 2-yr/2000-hour extended constrained guarantee on drum housing, cutter drum, shaft and ring-fetter hubs delivers you peace of mind.
Specialized data for BW-1000XL:
| General Dimensions and Weights | |
| Size – Feed Table Up, Tongue In | 4500 mm |
| Length – Desk Down, Tongue Prolonged | 5400 mm |
| Width | 1750 mm |
| Top | 2560 mm |
| Bodyweight – Motor | 2750 kg |
| Sound Electricity | 119 (db) |
| Engine | |
| Make and Design | Cummins QSF 2.8L Tier 3 |
| Variety of Cylinders | four |
| Gross Horsepower (Highest) | 74HP (fifty five Kw) /2400rpm |
| Torque (Max) | 371 Nm |
| Gasoline Tank Capacity | sixty five L |
| Max Gasoline Intake | 233g /Kw.h |
| Gasoline Variety | Diesel |
| Air Cleaner | two-stage dry with protection element |
| Oil Filter | Spin-on |
| Advisable Oil | 15W40 |
| Oil Quantity with Filter | 8.4 L |
| Amazing EPT Ability (Motor and Radiator) | thirteen L |
| Cooling Medium | Liquid |
| Supporter | 419mm |
| Clutch Type | Clutchless PTO |
| Clutch Drive Engagement | Belt tensioner |
| Feed Method | |
| Feed Roller Orientation | Horizontal |
| Number of Feed Rollers | one |
| Feed Roller Clamp Load | 158.8 kg |
| Feed Roller Minimal Distance to Drum | 25mm |
| Feed Roller Dimension | 508mm x 432mm |
| Amount of Knives | 2 |
| Fat of Feed Roller | 181.4 kg |
| Quantity of Feed Roller Motors | one |
| Motor Displacement | 28.3 |
| Motor Company | White |
| Feed Speed | 105 ft/min |
| Infeed Desk Width | 1321mm |
| Infeed Hopper Peak | 1330mm H x 750mm W |
| Infeed Throat Ability | 630mm H x 432mm W |
| Pinch Stage – Length to Conclude of Feed Table | 1689mm |
| Length from Feed Table to Ground | 820mm |
| Safety Technique | |
| Feeding end system | Unexpected emergency cease buttom on Aspect of Infeed Hopper |
| Reset Technique | Keep-to-operate Unexpected emergency quit buttom button |
| A few Placement Feed Manage Bar | StHangZhourd |
| Positions | three: forward, Cease and reverse |
| Drum/Disc Chopping System | |
| Materials Capability | 305mm |
| Diameter | 50mm |
| Velocity | 2240 rpm |
| Security Lock – Quantity of Positions | 2 |
| Variety of Knives | 2 parts |
| Quantity of Bedknife | 4 |
| Cutter Drive Parts | |
| Number of Bearings | 2 |
| Bore | 61mm |
| Sort | Spherical rollers |
| Maker | Linkbelt |
| Dynamic Ability | 14242.8 kg |
| Static Potential | 24267.2 kg |
| Belt Loafer/Tensioner | Yes |
| Belt Kind | 5V |
| Discharge Method | |
| Chute Top | 2565mm |
| Chute Rotation Angle | 270 deg |
| Rotation Sort | Chain-drivve handbook crank with pin lock |
| Rotational Lock | Yes |
| Hydraulic Technique | |
| Tank capacity | 26.5 L |
| Suggested Oil Sort | #68 Antiwear hydraulic oil |
| Method Variety | Open middle |
| Filtration Approach | ten micron return one hundred micron suction |
| Pump Flow at Greatest RPM | 11.4 L/min |
| Program reduction force | seventeen.24 Mpa |
| Stream Handle | Yes-Manual |
| Directional Control | Yes-Handbook |
| Oil Cooler | No |
| Electrical Program | |
| Program Voltage | twelve volt |
| Battery | 90/660 (Ah/A) Germany Walter Manufacturer |
| StHangZhourd Gauges | Gas, hour |
| Switches | Droop, rocker |
| Controller | BODE |
| Screen | Tach, fuel, voltage, drinking water temp, oil force,oil temp, loading, motor erro data |
| Shutdown System | Car Substantial temp, low strain protection |
| Chassis | |
| Tongue Extension | Extendable 610mm New Email hzpt@hzpt.com 305mm increments |
| Hitch Sort | Pintle |
| Fender Description | Bolt-on steel |
| Axle/Suspension | Torsion |
| Variety – Selection One | Rubber torsional |
| Brake Type | StHangZhourd Electric or optional hydraulic |
| Trailer Light-weight Kind | LED |
| General Proportions and Weights | |
| Duration – Feed Desk Up, Tongue In | 4500 mm |
| Length – Desk Down, Tongue Prolonged | 5400 mm |
| Width | 1750 mm |
| Top | 2560 mm |
| Weight – Engine | 2750 kg |
| Sound Power | 119 (db) |
| Engine | |
| Make and Design | Cummins QSF 2.8L Tier three |
| Quantity of Cylinders | 4 |
| Gross Horsepower (Optimum) | 74HP (fifty five Kw) /2400rpm |
| Torque (Max) | 371 Nm |
| Gasoline Tank Capability | 65 L |
| Max Gasoline Intake | 233g /Kw.h |
| Gasoline Type | Diesel |
| Air Cleaner | two-phase dry with basic safety aspect |
| Oil Filter | Spin-on |
| Suggested Oil | 15W40 |
| Oil Quantity with Filter | 8.4 L |
| Amazing EPT Potential (Engine and Radiator) | thirteen L |
| Cooling Medium | Liquid |
| Enthusiast | 419mm |
| Clutch Sort | Clutchless PTO |
| Clutch Drive Engagement | Belt tensioner |
| Feed System | |
| Feed Roller Orientation | Horizontal |
| Quantity of Feed Rollers | one |
| Feed Roller Clamp Load | 158.8 kg |
| Feed Roller Minimal Distance to Drum | 25mm |
| Feed Roller Dimension | 508mm x 432mm |
| Quantity of Knives | two |
| Weight of Feed Roller | 181.4 kg |
| Number of Feed Roller Motors | 1 |
| Motor Displacement | 28.three |
| Motor Company | White |
| Feed Speed | one zero five ft/min |
| Infeed Desk Width | 1321mm |
| Infeed Hopper Top | 1330mm H x 750mm W |
| Infeed Throat Potential | 630mm H x 432mm W |
| Pinch Position – Length to End of Feed Table | 1689mm |
| Length from Feed Desk to Floor | 820mm |
| Safety Method | |
| Feeding end system | Unexpected emergency stop buttom on Aspect of Infeed Hopper |
| Reset Method | Keep-to-run Crisis end buttom button |
| A few Position Feed Handle Bar | StHangZhourd |
| Positions | three: forward, Cease and reverse |
| Drum/Disc Cutting Program | |
| Substance Capacity | 305mm |
| Diameter | 50mm |
| Speed | 2240 rpm |
| Protection Lock – Variety of Positions | two |
| Number of Knives | two items |
| Variety of Bedknife | four |
| Cutter Generate Components | |
| Quantity of Bearings | 2 |
| Bore | 61mm |
| Sort | Spherical rollers |
| Producer | Linkbelt |
| Dynamic Ability | 14242.8 kg |
| Static Capability | 24267.2 kg |
| Belt Loafer/Tensioner | Sure |
| Belt Kind | 5V |
| Discharge System | |
| Chute Height | 2565mm |
| Chute Rotation Angle | 270 deg |
| Rotation Type | Chain-drivve handbook crank with pin lock |
| Rotational Lock | Yes |
| Hydraulic Program | |
| Tank potential | 26.5 L |
| Suggested Oil Sort | #68 Antiwear hydraulic oil |
| Technique Type | Open centre |
| Filtration Method | 10 micron return a hundred micron suction |
| Pump Circulation at Greatest RPM | 11.4 L/min |
| System reduction force | seventeen.24 Mpa |
| Circulation Management | Sure-Guide |
| Directional Manage | Indeed-Handbook |
| Oil Cooler | No |
| Electrical System | |
| System Voltage | 12 volt |
| Battery | ninety/660 (Ah/A) Germany Walter Brand |
| StHangZhourd Gauges | Fuel, hour |
| Switches | Droop, rocker |
| Controller | BODE |
| Exhibit | Tach, fuel, voltage, h2o temp, oil pressure,oil temp, loading, engine erro information |
| Shutdown Technique | Car High temp, reduced strain defense |
| Chassis | |
| Tongue Extension | Extendable 610mm New Email hzpt@hzpt.com 305mm increments |
| Hitch Type | Pintle |
| Fender Description | Bolt-on metal |
| Axle/Suspension | Torsion |
| Kind – Option 1 | Rubber torsional |
| Brake Kind | StHangZhourd Electrical or optional hydraulic |
| Trailer Gentle Kind | LED |
If you are searching for best wooden chipper shredder, welcome to get in touch with us!
