our products are selling well in the American, European, South American and Asian markets. a specialized supplier of a full range of chains, sprockets, gears, gear racks, V-belts, couplings and reducers， pto shaft, agricultural gearboxes….
–Driven (outer) yoke same as drive yoke but is mounted on the implement. There are two types of shafts, domestic and metric, which are identifiable by their shapes. Domestic are generally one of four shapes: round, square, rectangle or splined. Metric are: bell, star or football shaped. In either case the primary (front) shaft is the same shape as the secondary shaft, only bigger so that the secondary shaft fits inside. This allows a telescoping effect to take place when the implement is raised on the 3 pt. or during a turning movement such as a bailer. All shafts have to be sized before use. Attach the implement to the 3 pt. and raise and support it. Attach the proper end to the tractor and attempt to attach the other to the implement. If the shaft is too long trim one of the shafts with a hack saw and try it again until it fits. This allows for the implement to be raised without binding. The shafts should overlap as much as allowed.
- Applicable Industries:
- Other Country:
Black, Zinc plated, etc.
Grinding or not
longest 4 meters without welding
- Heat treatment:
Reply in 12 hours at any time
It was born in 1997, and is the fruit of the merger of different gearboxes brands. From the first products, it inherited a philosophy based in quality, profitability and technical rigor. EPG is present in all european market, through a complete distribution chain consisting of each market’s principal actors.
Oil+PE bag+ Wooden case
- Teeth Type:
Spur teeth or Helical teeth
Nylon, POM etc.
- Supply Ability:
- 5000 Piece/Pieces per Month
Packaging & Delivery
- Packaging Details
- to pretect the gear racks”>Antirust oil + PE bag + Wooden case
to pretect the gear racks
- Ningbo, Shanghai or as request
Quantity(Bags) 1 – 200 201 – 500 501 – 2000 >2000 EIt is our aim to supply a vast range of quality products at affordable prices, provide the best service for customers satisfied and contribute to our continued improvement. st. Time(days) 20 30 45 To be negotiated
High precision Metric Mechanism C8 steel router cnc rack pinion gear
Our spur and helical gear racks are welcomed by many customers for its stable high quality and competitive price.
The producing character of JH gear racks.
1. Gear rack length: the longest is 4000mm without joint. It can be jointed to any length.
2. Material: steel C45, stainless steel, high strength steel, copper, aluminium, nylon, plastic, POM etc;
3. Module: 0.3-8 (pitch from 0.942-25.12mm, DP 3.175-85);
4. Surface: zinc (galvanized), black, chromium plating, nickel plating, quenching and tempering etc.
5. Quality: stable and high: accumulated tolerance 0.1mm per 1000mm for normal quality;
Accumulated tolerance 0.02mm per 1000mm for 4 sides ground.
Prices for above quality are very competitive for us.
6. Heat treatment: teeth can be hardened to HRC 43-50.
The quality character of JH gear racks:
1. Stable transmission and low noise;
2. Effectively avoid normal tolerance based on high precision;
3. The surfaces can be ground to grade 7 quality, and teeth can be ground to grade 6 quality;
4. The mounting holes can be made as request;
5. The price is competitive even the quality is high.
CNC gear hobbing machine;
CNC gear shaper;
CNC gear grinding machine;
CNC turning machine;
CNC milling machine.
Y58200 CNC large gear rack shaper,
Y58125A gear rack shaper,
England gear rack shaper
and Russia gear rack shaper,
Steel: C45, Q235, 40Cr, 20CrMnTi, etc.
Stainless steel: 301, 201, 304, 316 etc.
Brass: H59 H68 H80 H90 etc.
Aluminium: 6082, 6061, A380 etc.
Aluminium alloy: 6061, 5083, 7050, etc.
More: PA6, PA66, POM, ABS etc.
Spur teeth gear rack;
Helical teeth gear rack;
Round gear rack;
Tube gear rack;
Curved gear rack.
|Surface||Polishing; Plating; Galvanized; Black; chromium plating, nickel plating; painting etc.|
1. Delivery time: 15-25 days for small order;
30-45 days for big order. (Never delayed till now)
Can be discussed for more urgent order.
2. Response time: usually in 1 hour and in 12 hours even in our holidays.
3. Process feedback: Photos or vedios will be sent for 2-3 times to inform you the producing situation.
4. Test report: The test report can be offered as request.
5. Trade terms: FOB, CFR, CIF, FCA, CPT, CIP, DDU, DDP etc.
A: Yes. Since 2004 only focus on producing high quality gears and racks.
Q: Response time?
A: Reply very soon, and reply in 12 hours at any time.
Our technicians are always together with salesmen, so your any questions can be replied very soon.
A: Drawings are more appriated for quotation. Or, please inform us your request, we will make drawings for your check.
Q: Delivery time?
A: 15-25 days for small order (<200 pcs), 30-45 days for large order.
Orders never be delayed, the products will be sent on time as agreement.
A: Middle and high quality is more competitive.
Hot related products