We inspect every piece of bearing by ourselves before delivery.
Overview
Quick Details
- Applicable Industries:
-
Manufacturing Plant
- Place of Origin:Zhejiang, China
Supply Ability
- Supply Ability:
- 10000 Piece/Pieces per Month
Packaging & Delivery
- Packaging Details
- Standard Sea Worthy Package
- Port
- shanghai ningbo
-
Lead Time
: -
Quantity(Cartons) 1 – 100 >100 Est. Time(days) 30 To be negotiated
Online Customization
–Driven (outer) yoke same as drive yoke but is mounted on the implement. There are two types of shafts, domestic and metric, which are identifiable by their shapes. Domestic are generally one of four shapes: round, square, rectangle or splined. Metric are: bell, star or football shaped. In either case the primary (front) shaft is the same shape as the secondary shaft, only bigger so that the secondary shaft fits inside. This allows a telescoping effect to take place when the implement is raised on the 3 pt. or during a turning movement such as a bailer. All shafts have to be sized before use. Attach the implement to the 3 pt. and raise and support it. Attach the proper end to the tractor and attempt to attach the other to the implement. If the shaft is too long trim one of the shafts with a hack saw and try it again until it fits. This allows for the implement to be raised without binding. The shafts should overlap as much as allowed.
Product Description
Chain Sprocket
sprocket,chain sprocket;sprockets;transmission parts;sprocket wheel
1. European standard sprockets & platewheels
No.Strands |
Pitch range |
1 |
5,6,8,3/8″—>3″ |
2 |
3/8″—->2″ |
3 |
3/8″—->2″ |
2. American standard sprockets
Type |
No.Strands |
Pitch range |
A,B,C |
1 |
5,6,8,3/8″—>3″ |
A,B,C |
2 |
3/8″—->2″ |
A,B,C |
3 |
3/8″—->2″ |
3. European Standard Finished bore Sprocket
Finished bore Sprockets are available with hardened teeth, Keyways and setscrews.
4. American Standard Finished bore Sprocket — Type “BS”
Finished bore Sprockets are available with hardened teeth, Keyways and setscrews.
5.Taper Lock Sprockets
No.Strands |
Pitch range |
1 |
3/8 “-2” |
2 |
3/8 “-1” |
3 |
3/8 “-1” |
6. “QD”Sprockets
No.Strands |
Pitch range |
1 |
3/8 “-2” |
2 |
3/8 “-1” |
3 |
3/8 “-1” |
7.European Standard Idler Sprockets ( Bearings installed)
8. American Standard Idler Sprockets
a. Ball bearing idler sprockets Harden teeth High speed
35BB20H, 40BB17H, 40BB18H, 50BB15H,
50BB17H, 60BB13H, 60BB15H, 80BB12H
b. Bronze bushed idler sprockets
31E20, 41E15, 51E15, 61E14
9. Double Pitch Sprockets
Type |
Teeth Range |
C2040 |
11~30 |
C2042 |
8~30 |
C2050 |
11~30 |
C2052 |
8 ~30 |
C2060 |
11~30 |
C2062 |
8~30 |
C2080 |
11~30 |
C2082 |
8~30 |
10. European standard platewheels and sprockets for conveyor Chain
Pitch |
Roller |
Teeth range |
20 |
12 |
12~40 |
30 |
15.88 |
11~38 |
50 |
25 |
6~38 |
50 |
28 |
8~24 |
50 |
31 |
6~38 |
50.8 |
30 |
8~28 |
75 |
25 |
8~25 |
75 |
31 |
8~25 |
100 |
25 |
8~20 |
100 |
31 |
8~20 |
100 |
40 |
8~20 |
11. American standard Double Single Sprockets
12. Sprockets for Table Top sprockets
13. Stainless steel sprocket
14. Cast iron Sprockets
15. Weld on sprockets
16. InstantWorm gears are the most compact type of system and provide high-ratio speed reduction. They are often the preferred type of gearing system when space is limited and large gear reductions are needed. Worm gears can be used to either greatly increase torque or greatly reduce speed. They are also the smoothest and quietest of the gear systems, as long as they are properly mounted and lubricated. Sprockets
17.Sprockets for Engineering Chains
18. American standard 800 series conveyor sprockAdhering to “Survival by Quality, Development by Technology & Credit”, The company will constantly improve product performance to meet the increasing customer requirements in the rigorous style of work. ets
19. Special sprockets Made acc. to customers’ requirements.
Exhibition