Materials Managing Power UNIT 1
This power unit is made to the fork lift industry, consisting of extremely effective gear pump, DC motor, manual raise and decrease valve, tank, ect. The up and down movement are managed by the lever with the manual release valve, and that is equipped with an electrical switch to activate the motor. The lowing pace is controlled by the stress compensated flow handle valve.
1. The duty of this power unit is S3, i.e. 30 seconds on and 270 senconds off.
2. Clean the many hydraulic parts concerned just before installation of the power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which really should also be clean and cost-free of impurities, N46 hydraulic oil is recommended .
4. Oil changing is required after the original a hundred operation hours, afterwards when just about every 3000 hrs.
5. The power unit shown is built to be mounted horizontally.
Materials Dealing with Electrical power UNIT two
This electrical power unit functions power up gravity down circuit. Activate the commence solenoid to start the motor to lift the machine. The lowing movement is activated by the solenoid valve with all the reducing velocity managed by the pressure compensated flow management valve. Items of this series might be broadly utilized in the sector of logistic products such as fork lift, mini lift table, and so on.
1. The duty of this power unit is S3,i.e.,thirty seconds on and 270 senconds off.
2. Clean all the hydraulic elements concerned prior to mounting the electrical power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst,which should really also be clean and free of charge of impurities, N46 hydraulic oil is encouraged .
four. Oil transforming is needed following the first 100 operation hours,afterwards the moment each 3000 hrs.
five. The power unit need to be mounted horizontally.