PersonnelOur income people are properly skilled to accommodate your requests and talk English for your convenience. Advanced thermo remedy gear, such as community warmth therapy oven, multi-use thermo remedy oven, and so forth. Good quality and credit score are the bases that make a corporation alive. Introduction:
1. HS series slurry pump is designed for the continuous pumping of large abrasive, EPT slurries with minimal maintenance requirements. The donning areas are made of ultra chrome or and rubber. It will sustain substantial efficiency in excess of the dress in existence of its parts.
2. The metal soaked elements and rubber kinds can be interchangeable for handling different liquids or slurries.
3. HS slurry pumps are available in measurements ranging from one inch to eighteen inch discharge and characteristic substantial effectiveness efficiency able of flow costs from 10.eight to 5400 m sup3/h and heads up to 125 meters for substantial head versions.
Functions:
1. Cylindrical construction of bearing assembly: hassle-free to modify the place in between impeller and JCEP liner
and can beremoved fully
2. Interchangeable anti-abrasive wet elements made of high-chrome alloys
three. Casing halves of ductile iron with exterior reinforcing ribs give higher working force abilities
and an extra measure of basic safety.
four. The discharge department can be oriEPTTd to any eigEPTT positions at the interval of forty five degrees
5. Various EPT kinds: DC(direct relationship), V-belt EPT, EPT box EPTT, EPT couplings, VFD,
SCR handle, etc
6. The shaft seal employs the EPTT seal, expeller seal and mechanical seal
Typical Application:
#8226 Mineral processing | #8226 EPT | #8226 EPTT Washery | #8226 Cyclone feeds |
#8226 Bentonite | #8226 EPTT slurry | #8226 EPTEPTTng | #8226 Mill grinding |
#8226 Ash hXiHu (West EPT) Dis.Hu (West EPT) Dis. | #8226 Tunnel | #8226 Waste sludge | #8226 Coarse sand |
#8226 Lime mud | #8226 Phosphoric acid | #8226 EPTT | #8226 EPTT |
#8226 Alumina JCEP | #8226 EPTT Plant | #8226 Potash FerEPTTzer Plant | #8226 Other EPTT |
#8226 Iron ore sand | #8226 JCEP Concentration | #8226 EPT EPT | #8226Molybdenum |
Design | Max EPTT (Kw) |
Inlet amp Outlet measurement (inch) | EPT for Dress in Elements | Stream Rate (Q) | EPT (H) meter |
Velocity (RPM) |
EPTTeller Dia. (mm) |
|
m sup3/hr | l/s | |||||||
25HS-B | fifteen | 1.5/one | M | 12.six~28.8 | 3.five~8 | six~sixty eight | 1200~3800 | 152 |
R | 10.eight~twenty five.two | 3~7 | 7~fifty two | 1400~3400 | 152 | |||
40HS-B | fifteen | 2/1.5 | M | 32.four~seventy two | 9~twenty | six~fifty eight | 1200~3200 | 184 |
R | twenty five.two~54 | seven~fifteen | five.five~41 | 1000~2600 | 178 | |||
50HS-C | 30 | three/2 | M | 39.6~86.4 | eleven~24 | twelve~sixty four | 1300~2700 | 214 |
R | 36~seventy five.six | 10~21 | thirteen~46 | 1300~2300 | 213 | |||
75HS-C | 30 | 4/3 | M | 86.four~198 | 24~fifty five | nine~52 | one thousand~2200 | 245 |
R | seventy nine.two~a hundred and eighty | 22~fifty | five~34.5 | 800~1800 | 245 | |||
100HS-D | sixty | six/4 | M | 162~360 | 40~a hundred | 12~56 | 800~1550 | 365 |
R | one hundred forty four~324 | forty~90 | twelve~45 | 800~1350 | 365 | |||
150HS-E | one hundred twenty | 8/six | M | 360~828 | one hundred~230 | 10~sixty one | 500~1140 | 510 |
R | 324~720 | 90~200 | seven~forty nine | 400~one thousand | 510 | |||
200MS-E | a hundred and twenty | ten/8 | M | 666~1440 | 185~four hundred | fourteen~sixty | 600~1100 | 549 |
200HS-ST | 560 | 10/8 | M | 612~1368 | one hundred seventy~380 | eleven~sixty one | four hundred~850 | 686 |
R | 540~1188 | one hundred fifty~330 | 12~50 | 400~750 | 686 | |||
250HS-ST | 560 | twelve/ten | M | 936~1980 | 260~550 | seven~68 | 300~800 | 762 |
R | 720~1620 | 200~450 | 7~forty five | three hundred~650 | 762 | |||
300HS-TU | 560 | 14/twelve | M | 1260~2772 | 350~770 | thirteen~sixty three | three hundred~600 | 965 |
R | 1152~2520 | 320~seven hundred | thirteen~44 | three hundred~five hundred | 965 | |||
350HS-TU | 1200 | 16/14 | M | 1368~3060 | 380~850 | 11~sixty three | 250~550 | 1067 |
450HS-TU | 1200 | twenty/18 | M | 2520~5400 | seven-hundred~1500 | 13~57 | two hundred~400 | 1370 |
25HHS-C | thirty | one.5/1 | M | sixteen.two~34.2 | 4.5~nine.5 | 25~ninety two | 1400~2200 | 330 |
50HHS-D | 60 | three/2 | M | 68.4~136.eight | 19~38 | 25~87 | 850~1400 | 457 |
75HHS-E | one hundred twenty | four/three | M | 126~252 | 35~70 | twelve~97 | 600~1400 | 508 |
100HHS-E | a hundred and twenty | 6/four | M | 324~720 | 90~200 | thirty~118 | 600~1000 | 711 |
150HHS-S | 560 | eight/six | M | 468-1008 | one hundred thirty~280 | 20~94 | 500~1000 | 711 |
For the substance of donning components,
quotM quot = steel, extremely chromium alloy quotR quot = anti-abrasive rubber
Make contact with
Welcome to make contact with us any time for details.
Your inquiry will get our prompt interest and reaction !